fiberglass rebar making machine

The line is the special pultrusion machine used to produce FRP rebarS with different specifications.

The line is the special pultrusion machine used to produce FRP rebar with different specifications. It can finish distributing roving, impregnation, pre-molding, winding, heating and curing, unwinding, fix-length cutting and pile up automatically.

  A.  Structure principle:

       This line mainly consists of roving racks, resin bath, winding, heating oven, unwinding device, traction machine, cutting saw and racks for finished products.

a. Roving racks: used to place the rolls, adopts the welding structure of steel plate, steel pipe and angle iron.

b. Resin bath: welded by stainless steel material, there is press roller inside to make the roving dip in the resin sufficiently.

c. Winding&unwinding device: adopts gear wheel to drive the roller turn around the products, and wind the thread. This device adopts frequency conversion speed-regulated mode, adjust the rotate speed stepless.

d. Heating oven: adopts cast aluminium heater, intelligent temperature controller to control the temperature. The heating box adopts mesh structure and it is easy to open it and clean the dropping resin, filled with insulation materials inside.

e. The material of mould is 45 or 40Cr painted with chrome on the surface.

B. Technical parameter

Working voltage: 380V/50Hz

Total power: ≈30KW

Air pressure: 0.4-0.6Mpa

Center height of the line: 1000mm

Dimension: ≈20000mm(L)x1850mm(W)x1450mm(H)

1. Roving racks

Ivory paint, combined structure, easy accessibility

Rolls capacity: 70-100/5 layers

Dimension: 2m(L) x 0.6m(W) x 2m(H)

Standard configuration: 2 sets

2. Resin bath

Number: 1 set

Body dimension: 1030mm x 720mmx190mm

Resin capacity: about 50kg

Support frame dimension: 1110mmx 810mmx900mm

3. Winding machine

Number of winding head: 2

Winding power: 0.75KW

Winding rotation speed: 9-95rpm

Winding diameter: 8-30mm Max.30mm

Resin bath heating (optional): 1KW

Heating oven power: 2x5 zones  220V/50HZ 10x2.4KW (length 5.5m)

Temperature control zones: 1+2x5

4.  Traction machine

Traction power: 380V/50HZ 1.1KW

Traction speed: 0.1-1m/min

Traction force: Max. 40KN

Clamping length: 1200mm

Clamping width: 500mm

5. Cutting saw

Cutting range: 600mm(W)x65mm(H)

Cutting power: 380V/50HZ 1.5KW

Vacuum cleaner power: 380V/50HZ 1.5KW

Tracing cutting journey: 700mm

Length-fix mode: limit switch

6. Racks for finished products

Square tube and steel plate welded structure

Standard configuration: simple platform type  1 set

Dimension: 4m(L) x 0.55m(W) x 0.9m(H)

fiberglass rebar making machine